Tamiya 58459 1/10 Electric Car RCC Datsun 240Z Rally Version (DF-03Ra Chassis)
The East African Safari is one of the world's more grueling off-road racing events. It began in 1953 to mark the Coronation of Queen Elizabeth II. The event took place through the East African nations of Kenya, Uganda, and Tanzania. The event continued over four days to complete the 6,200km journey.
About the East African Safari RallyAfter a victory in 1970, Nissan entered the 1971 Safari Rally with four Datsun 240Z series cars. The 240Z, which was powered by a 5-speed, straight-six L24 OHC engine, became popular among spectators because of its incredible performance. The No. 11 Datsun 240Z, driven by Herrman and Schuller, won the Over-all Victory, Class Victory, Team Victory and Manufactures Championship. Nissan became the first company to win back-to-back victories in all three categories. Herrman and Schuller became the first team to win back-to-back over-all victories.
Specs & Features
1/10 R/C assembly kit.
Wheelbase: 251mm. (Use kit supplied suspension arms for a short wheelbase)
Polycarbonate body.
Stickers and masking seals included.
Type 540 motor included.
Light cases, two spotlights on the hood, and front and rear bumpers are reproduced with separately molded resin parts.
Add exciting lighting action to your machine with separately available Tamiya LED light Unit TLU-01 (Item 53909) (LEDs not included in kit).
Black offset +2 wheels and Rally Block Tires included.
TEU-104BK ESC included.
2-ch R/C system, battery pack and charger are separately available.
A wide variety of Option Parts are available to further customize your chassis.
How to get Tamiya 58459 1/10 Electric Car RCC Datsun 240Z Rally Version (DF-03Ra Chassis)? Click here!
Tamiya 58454 1/10 RC M-Chassis Electric S800 Racing (M-05)
Specs & Features
1/10 R/C assembly kit of the Honda S800.
Polycarbonate body mounted on the M-05 chassis.
Monocoque frame features a layout that optimizes weight distribution and lowers the chassis' center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Sticker sheet and type 540 motor included.
2-channel R/C system, battery pack, and charger are separately required.
Wide variety of Option Parts are separately available to further customize your machine:
Item 54000 M-Chassis Aluminum Damper Set (4pcs.)
Item 54177 M-05 Aluminum Front Upright (Blue)
Item 54178 M-05 Aluminum Rear Upright (Blue)
Item 54179 M-05 Ball Bearing Set
Item 54180 Titanium Screw Set
How to get Tamiya 58454 1/10 RC M-Chassis Electric S800 Racing (M-05)? Click here!
Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2
Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2
How to get Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2? Click here!
Tamiya 53119 Option Parts Special King Pin
Compatible Chassis or Parts: F103
How to get Tamiya 53119 Option Parts Special King Pin? Click here!
Tamiya 51282 Option Parts TRF501X X Parts(Damp.Retainer)
Compatible Chassis or Parts: TRF501X
How to get Tamiya 51282 Option Parts TRF501X X Parts(Damp.Retainer)? Click here!
Tamiya 57799 1/10 XB - Expert Built Electric BMW M3 GT2 2009 (TT01E)
The ready to run electric powered R/C Car of the 2009 BMW M3 GT2 was developed to compete in the American Le Mans Series. Rahal Letterman Racing raced the cars on behalf of BMW Motorsports. The return of BMW to the American Le Mans Series competitions coincided with the 10-year anniversary of the series in 2008.
Specs & Features
Length: 452mm, Width: 188mm, Height: 132mm.
Polycarbonate body is fully finished and captures the beautiful form of the BMW E92 M3.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Equipped with LED Light Unit TLU-01 (Item 53909) with LEDs for headlights and taillights (2 each). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled.
Each front light case has one 5mm and one 3mm LED Light installation points.
Each rear light case has one 5mm and two 3mm LED Light installation points.
Finespec FM transmitter, TEU-104BK ESC, TRU-05 receiver, TSU-03 servo, and type 540 motor included.
Battery pack and charger separately required.
A wide variety of Option Parts are available to further customize your machine:
Item 51000 Hi-Torque Servo Saver Black
Item 53663 Ball Differential Set (TT-01, TGS)
Item 53666 TT-01 Metal Motor Mount
Item 54025 TT-01 Type-E Ball Bearing Set
Item 54026 TT-01 Alu. Prop. Joint & Shaft
How to get Tamiya 57799 1/10 XB - Expert Built Electric BMW M3 GT2 2009 (TT01E)? Click here!
Tamiya 51395 Bodies COROLLA Axio apr GT Body
The Toyota Corrolla was modified for racing in the JGTC series for 2008.'The Corolla Axio was built by APR and unveiled at the Tokyo Auto Salon in 2009. The car features a water-cooled 3500cc V6 engine that delivers 300hp. The car was featured in the 2009 Super GT racing series.
Specs & Features
Polycarbonate shell captures the aero dynamic form of the Corolla Axio apr GT.
Width: 191mm, Length: 435mm, Wheelbase: 257mm.
Screws & nuts, sticker sheet, and masking seals included.
Can be used with TA05 series, TB-03, and TT-01-series chassis.
How to get Tamiya 51395 Bodies COROLLA Axio apr GT Body? Click here!
Tamiya 54202 Option Parts F104 Alu. Upper Sus. Mount
Fine-tune your chassis to match the track conditions with this blue anodized Aluminum Upper Suspension Mount set. Up to four different camber angles can be set.
Specs & Features
Aluminum Upper Suspension Mount x 1pc.
Can be used with F104 and F104 PRO chassis.
*This item is not included in F104 PRO assembly kit models.
How to get Tamiya 54202 Option Parts F104 Alu. Upper Sus. Mount? Click here!
Tamiya 54201 Option Parts F104 Plated Mesh Wheel RubberT
Make your 1/10 R/C Ferrari F60 stand out with Tamiya's metal plated wheels. The wheels feature a matt finish.
Specs & Features
Front tires x 2pcs.
Rear tires x 2pcs.
Tires not included.
How to get Tamiya 54201 Option Parts F104 Plated Mesh Wheel RubberT? Click here!
Tamiya 50724 Spare Parts PIAA Accord VTEC Wheels*2
Compatible Chassis or Parts: SP 419, 454, 476, 810OP 214, 220 , 224, 227, 293, 294 Offset + 2mm
How to get Tamiya 50724 Spare Parts PIAA Accord VTEC Wheels*2? Click here!
Tamiya 51246 Bodies Nismo R34 GT-R Z-tune Body
Clear body set of the 1/10 NISMO R34 GT-R Z-tune.
* Compatible chassis: TA05, TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415
How to get Tamiya 51246 Bodies Nismo R34 GT-R Z-tune Body? Click here!
Tamiya 58313 1/10 Electric Car TT-01 4WD Raybrig NSX 2003
The Japan GT Championship Raybrig NSX 2003 released on the popular TT-01 chassis. Perfect for the beginner, the bathtub 4WD TT-01 chassis is lightweight, has excellent weight distribution, is easy to assemble and has loads of separately available grade-up parts. Features 6-spoke wheels (gun metal), racing slick tires and 3-step mechanical speed control.
Model Specifications
Overall length=420mm, Overall width=189mm, Overall height=130mm.
High performance double wishbone suspension.
Lightweight resin propeller and drive shaft.
Comes with 540 motor.
How to get Tamiya 58313 1/10 Electric Car TT-01 4WD Raybrig NSX 2003? Click here!
Tamiya 51397 Bodies Ferrari F60 Body
Specs & Features
Polycarbonate body of the Ferrari F60.
The side mirrors, front and rear wings, driver figure, screws & nuts, sticker sheet are included.
Paint your F60 with separately available polycarbonate spray Item: 89922 PS F60 Ferrari Red.
How to get Tamiya 51397 Bodies Ferrari F60 Body? Click here!
Tamiya 54203 Option Parts F104 Alu. Servo Mount L/R
Improve overall chassis rigidity and create a sharper steering response with this blue anodized Aluminum Servo Mount set.
Specs & Features
Aluminum Servo Mount (L) x 1pc.
Aluminum Servo Mount (R) x 1pc.
Can be used with F104 and F104 PRO chassis.
*This item is not included in F104 PRO assembly kit models.
How to get Tamiya 54203 Option Parts F104 Alu. Servo Mount L/R? Click here!
Tamiya 53746 Option Parts Rear Sponge Tires 37 (30mm Width)
RC GP Rear Sponge Tires 37
A pair of sponge tires that efficiently transmit the power generated by a glow engine to true running performance. Tires provide excellent grip performance at any temperature. Tires come pre-attached to wheel. The number of the tire denotes the hardness. The higher the number, the harder the tire. The lower the number the better the gripping performance.
How to get Tamiya 53746 Option Parts Rear Sponge Tires 37 (30mm Width)? Click here!
Tamiya 53480 Option Parts TA04 LightWeight Diff.Joint
Compatible Chassis or Parts : TA04?PRO, TRF414M
How to get Tamiya 53480 Option Parts TA04 LightWeight Diff.Joint? Click here!
Tamiya 54167 Option Parts F104 Sponge Tires B (4430 Front)
Sponge tires X 2pcs.
Tire inner diameter: 44mm, Tire width: 30mm.
These tires have a harder composition in comparison with Spare Parts Item 51384 F104Sponge Tires B (4430, Front, Standard).
How to get Tamiya 54167 Option Parts F104 Sponge Tires B (4430 Front)? Click here!
Tamiya 53479 Option Parts TA04 Low Friction Suspension Shaft
Compatible Chassis or Parts : TA04.PRO, TA04
How to get Tamiya 53479 Option Parts TA04 Low Friction Suspension Shaft? Click here!
Tamiya 50871 Spare Parts TA04 Battery Holder
Tamiya 50871 Spare Parts TA04 Battery Holder
How to get Tamiya 50871 Spare Parts TA04 Battery Holder? Click here!
Tamiya 53826 Option Parts TB-Evo4 F.C.Ball-Head King Pin
These flourine coated ball head king pins allow for smoother suspension operation.
How to get Tamiya 53826 Option Parts TB-Evo4 F.C.Ball-Head King Pin? Click here!
Tamiya 50870 Spare Parts TA04 Front Hub Carrier
Compatible Chassis or Parts : TA04.PRO, TA04
How to get Tamiya 50870 Spare Parts TA04 Front Hub Carrier? Click here!
Tamiya 50509 Spare Parts F-1 Front Spring Set
Compatible Chassis or Parts : F103
How to get Tamiya 50509 Spare Parts F-1 Front Spring Set? Click here!
Tamiya 51387 Bodies Ford Bronco 1973 Body
Compatible Chassis or Parts: M03M, M-05, M-05PRO
How to get Tamiya 51387 Bodies Ford Bronco 1973 Body? Click here!
Tamiya 54191 Option Parts M-05 Alu. Racing Steering Set
Hop-up your M-05 chassis with the Aluminum Racing Steering Set. This high precision steering set features greater durability and will provide your M-05 with improved handling. For best performance, use with the Aluminum Steering Set (Item 54191). *Not included in the M-05 PRO.
Specs & Features
Newly designed Steering Arm (Left) (Blue anodized) x 1pc.
Newly designed Steering Arm (Right) (Blue anodized) x 1pc.
3x10mm Screw x 2pcs.
3x0.7mm Spacer (Aluminum) x 2pcs.
5.5x2mm Setting Spacer (Aluminum) x 1pc.
Hollow Ball Connector Nut x 1pc.
5x0.1mm Shim x 4pcs.
3x12mm Hollow Screw x 1pc.
Can be used with M-05 and M-05PRO kits.
How to get Tamiya 54191 Option Parts M-05 Alu. Racing Steering Set? Click here!
Tamiya 54194 Option Parts M-05 Ball Diff Set
Hop-Up your M-05 with the Ball Differential Set. The differential set provides traction and stability to your machine even if one wheel has no contact with the track surface. This is a essential Hop-Up part for your M-05 chassis. *Not included in the M-05 PRO.
Specs & Features
Newly designed Aluminum Differential Joint A (Hard anodized) x 1pc.
Newly designed Aluminum Differential Joint B (Hard anodized) x 1pc.
2x25mm Cap Screw x 1pc.
5x0.5mm Spacer x 1pc.
2mm Nylon Nut x 1pc.
3mm Steel Ball x 8pcs.
Differential Plate x 2pcs.
TRF414X Diff. Spring x 1pc.
Urethane Bushing x 2pcs.
620 Reinforced Thrust Bearing x 1pc.
850 Bearing x 2pcs.
1510 Bearing x 2pcs.
Ball Diff Grease 1g x 1pc.
Diff Carrier x 1pc.
TRF415MSX Y Parts (Swing Shaft Protector) x 1pc.
Can be used with M-05 and M-05PRO kits.
Note: *Use with M03 Assembly Universal Shaft (Item 53597).
How to get Tamiya 54194 Option Parts M-05 Ball Diff Set? Click here!
Tamiya 54195 Option Parts M-05 Alu. Turnbuckle Steer Rod
Hop-Up your M-05 with the Aluminum Turnbuckle Steering Rod. This lightweight steering rod enables quick and easy length adjustments without having to detach the rod from the chassis. *Not included in the M-05 PRO.
Specs & Features
Newly designed 93mm Aluminum Turnbuckle Steering Rod (Blue anodized) x 1pc.
5mm Adjuster x 1pc.
Can be used with M-05 and M-05PRO kits.
Note: *3x89mm Threaded Shaft can also be used.
How to get Tamiya 54195 Option Parts M-05 Alu. Turnbuckle Steer Rod? Click here!
Tamiya 54192 Option Parts M-05 Alu. Steering Link
Hop-Up your M-05 chassis with the Aluminum Steering Link. This new high precision steering link is very durable and improves the handling and response of your Mini. *Not included in the M-05 PRO.
Specs & Features
Newly designed Steering Link (Blue anodized) x 1pc.
5mm Ball Connector x 2pcs.
5.5x1mm Setting Spacer (Aluminum) x 2pcs.
Can be used with M-05 and M-05PRO Kits
How to get Tamiya 54192 Option Parts M-05 Alu. Steering Link? Click here!
Tamiya 54193 Option Parts M-05 Alu. Steering Post
Hop-Up your M-05 chassis with Aluminum Steering Posts. The steering post set provides your M-05 with greater durability and improved stability. For best performance, use with the Aluminum Steering Set (Item 54191) and Aluminum Steering Link (Item 54192). *Not included in the M-05 PRO.
Specs & Features
Newly designed Steering Post (Blue anodized) x 2pcs.
Newly designed Post Stay (Blue anodized) x 2pcs.
3x8mm Hollow Screw x 2pcs.
3x6mm Screw x 2pcs.
3x12mm Screw x 2pcs.
Can be used with M-05 machines. *It is necessary to replace the kit supplied plastic bearings with ball bearings.
Can be used with M-05PRO kits
How to get Tamiya 54193 Option Parts M-05 Alu. Steering Post? Click here!
Tamiya 56512 1/14 RC Tractor Truck Twin-Spoke Front Alu. Wheels
These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.
Specs & Features
Wheel rims and hub are made of aluminum.
Two kinds of hub caps are included to depict those seen on European and North American roads.
Wheels come pre-assembled. x 2pcs.
Wheel hubs x 2 kinds (total 4pcs.)
1.6mm cap screws x 25pcs.
1.5mm hex wrench x 1pc.
2x6mm screws x 6pcs.
Suitable for 22mm wide tires.
How to get Tamiya 56512 1/14 RC Tractor Truck Twin-Spoke Front Alu. Wheels? Click here!
Tamiya 56513 1/14 RC Tractor Truck Twin-Spoke Out. R Alu. Wheels
These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.
Specs & Features
Wheel rims and hub are made of aluminum.
Wheels come pre-assembled. x 2pcs.
Wheel hubs x 2pcs.
1.6mm cap screws x 25pcs.
1.5mm box wrench x 1pc.
2x6mm screws x 6pcs.
2mm nuts x 6pcs.
Suitable for 22mm wide tires.
How to get Tamiya 56513 1/14 RC Tractor Truck Twin-Spoke Out. R Alu. Wheels? Click here!
Tamiya 58307 1/10 RC M-Chassis Electric M-04 Alfa Remo Giulia GTA/ESC
To meet customers requests the popular Alfa Romeo Giulia Sprint GTA, first released in 1996 with a M-02M chassis, is being re-released with an M-04M chassis.
About the Giulia Sprint GTA
Alfa Romeo released the speedy Giulia Sprint GTA as a base car to compete for the European Touring Car Championships. With victories in 66, 67 and 69, the GTA name become synonymous with Alfa Romeo high performing sports cars. Despite the elegant and refined design, boasting a light aluminum body and a DOHC four-cylinder engine producing 115hp, there is no doubt this car was built to win. More than 30 years later, the Giulia Sprint GTA is as popular as ever.
About the Model
Polycarbonate body and silver plated front grill
M-04M chassis with a 225mm wheel base (same as the M-02M)
Front tires are 60D Radial and rear tires are 60D Super Grip
How to get Tamiya 58307 1/10 RC M-Chassis Electric M-04 Alfa Remo Giulia GTA/ESC? Click here!
Tamiya 50959 Bodies Toyota MR-S Racing Body
Compatible Chassis or Parts: TA04-SS
How to get Tamiya 50959 Bodies Toyota MR-S Racing Body? Click here!
Tamiya 58364 1/10 Electric Car Nismo R34 GT-R/R34(TT01)
This high-performance R/C model depicts the GT-R(R34) Z-tune, complete with front louver and flared fenders. Aiming for high-display quality as well, this kit includes an LED light unit allowing realistic depiction of head and tail lights. The ultimate road car is now the ultimate R/C machine!
About the GT-R Z-tune
The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMO s Z-tune has been called the ultimate road-going car, combining luxury with superior performance.
About the Model
High-quality R/C Nismo GT-R Z-tune on the lightweight, easy to assemble TT-01 chassis
High quality polycarbonate body realistically depicts the ultimate road car GT-R Z-tune
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox
New plastic parts to reproduce wing, side mirrors, headlight case and tail-light case
Kit includes 4 LED lights to depict head and tail lights, (white headlights x 2, red tail-lights x 2). Lights turn on automatically when R/C car is switched on. Lights cannot be operated independently with straight-from-box settings
Kit includes electronic speed controller (TEU-101 BK)
Wide variety of tune-up parts available (sold separately) allowing the TT-01 to develop with your R/C experience and knowledge
How to get Tamiya 58364 1/10 Electric Car Nismo R34 GT-R/R34(TT01)? Click here!
Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay
Fine-tune your DF-03Ra with this new carbon rear damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.
Specs & Features
Carbon Rear Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
3x8mm Screws x 8pcs.
3x10mm Screws x 4pcs.
5mm Ball Connector x 2pcs.
5mm Ball Connector Nut x 2pcs.
5x23.5mm Ball Connector x 2pcs.
Can only be used with DF-03Ra kits.
How to get Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay? Click here!
Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay
Fine-tune your DF-03Ra with this new carbon front damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.
Specs & Features
Carbon Front Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
Carbon Damper Stay Setting Spacer Set (from Item 53873) x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
Screws and nuts included.
Can only be used with DF-03Ra machines.
How to get Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay? Click here!
Tamiya 58333 1/10 Electric Car Impreza WRC 2004 (TT-01)
Basic Specifications
Overall length: 441mm
Overall width: 185mm
Overall height: 145mm
Wheelbase: 257mm
Transmission Type: Longitudinally mounted motor with shaft-drive 4WD Chassis frame material: ABS
Suspension: Double Wishbone (Front & Rear)
Accurately shaped polycarbonate body of the 2004 Subaru Impreza on the lightweight easy to assemble TT-01 chassis.
4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Powered by a Type 540 motor.
Kit includes gold wheels, radial tires and TEU-101BK ESC
Loads of grade-up parts available (sold separately) allowing the TT-01 to match your R/C experience and knowledge.
The Subaru Impreza that displayed formidable speed and perfect consistency throughout the 2004 WRC season now makes its way to our 1/10 scale TT-01 chassis line-up. With accurately reproduced rearview mirrors, sectioned rear wing and polycarbonate body shell, the kit features all necessary markings for the 2004 Rally Mexico. The high performance, easy to assemble 4WD shaft-driven TT-01 chassis will make you feel like a real WRC driver.
About the 2004 Subaru Impreza
Taking advantage of new regulations, the 2004 Impreza features loads of improvements to the body, engine, suspension and aerodynamic design. The rear wing has been redesigned for improved aerodynamic performance and the flat horizontally opposed engine has been refined for more power. Making its debut in Mexico in round 3, the 2004 Impreza performed well in its first outing leading for most of the round until suffering a 5-minute penalty. 2003 Champion Petter Solberg has since been able to steer the Impreza to victories on the smooth gravel of New Zealand and the rough terrain of Greece, proving the new Impreza impresses on all surfaces. Currently second in the Drivers Championship, Solberg is chasing back-toback Championships.
Lightweight & Perfectly Balanced
The longitudinally placed motor allows reliable power transfer through a shaft-driven 4WD transmission. Drive train and battery are loaded flat in the bathtub chassis for a low center of gravity, giving you a perfectly balanced chassis. 4-wheel double wishbone suspension combines with front and rear diff gear to ensure consistent handling and excellent cornering performance. The overall chassis has been designed for easy assembly and maintenance making it perfect for those new to the world of R/C cars.
Required Items (Sold Separately)
R/C Unit: Expec GT-I or 2-channel R/C unit with ESC
Battery: Tamiya 7.2V Racing Pack or equivalent
How to get Tamiya 58333 1/10 Electric Car Impreza WRC 2004 (TT-01)? Click here!
Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)
Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)
How to get Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)? Click here!
Tamiya 53030 Option Parts 850 SEALED BALL BEARING
These 5x8 rubber sealed bearings replace the brass bushings in the cantilever arm for smooth suspension movement. The TLT-1 requires 8 bearings. Set includes 4 bearings.
How to get Tamiya 53030 Option Parts 850 SEALED BALL BEARING? Click here!
Tamiya 53008 Option Parts 1150 Sealed Ball Bearing
5x11 MM sealed ball bearing.
How to get Tamiya 53008 Option Parts 1150 Sealed Ball Bearing? Click here!
Tamiya 51263 Spare Parts Ferrari FXX Wheel(26mm/Off4)*4
Wheels included with TT-01 Ferrari FXX are now available as spare parts. Offset 4mm wheels are also expected to fill a demand for wide-tread compatible wheels, which are lacking on the market. these wheels are 26mm wide.
*Compatible with TT-01 chassis.
How to get Tamiya 51263 Spare Parts Ferrari FXX Wheel(26mm/Off4)*4? Click here!
Tamiya 51254 Spare Parts TB Evo 5 L Parts (Gear Cover)
Compatible Chassis or Parts: TB Evolution 5
How to get Tamiya 51254 Spare Parts TB Evo 5 L Parts (Gear Cover)? Click here!
Tamiya 50586 Spare Parts 3mm Washer *15
Tamiya 50586 Spare Parts 3mm Washer *15
How to get Tamiya 50586 Spare Parts 3mm Washer *15? Click here!
Tamiya 57794 1/10 XB - Expert Built Electric XB Cusco Impreza(TT01E)
The 2008 Super GT championship race 4 and decorating classes at Sepang race showed a significant breakthrough in the GT300 class the only AWD car is a Tamiya electric CUSCO DUNLOP SUBARU IMPREZA completed. Has turned into a thrilling experience in race cars filled polycarbonate to four Doasedanbodi reproduced. Including a small mirror and a large rear wing, front bumper canards on both sides, attractive finish and high scale before and after light-plated case. 10-spoke wheels and was equipped with Reshingusurikkutaiya.
How to get Tamiya 57794 1/10 XB - Expert Built Electric XB Cusco Impreza(TT01E)? Click here!
Tamiya 54183 Option Parts M-Ch. Rein. Freewheel Axle Set
Compatible Chassis or Parts: M-05, M-03, M-04
How to get Tamiya 54183 Option Parts M-Ch. Rein. Freewheel Axle Set? Click here!
Tamiya 54184 Option Parts M-05 Alu. Motor Plate
Tamiya 54184 Option Parts M-05 Alu. Motor Plate
How to get Tamiya 54184 Option Parts M-05 Alu. Motor Plate? Click here!
Tamiya 51391 Spare Parts M-05 C Parts (Sus. Arm)
Compatible Chassis or Parts: M-05
How to get Tamiya 51391 Spare Parts M-05 C Parts (Sus. Arm)? Click here!
Tamiya 50503 Spare Parts F-1 Front Suspension Arm( B-PART)
Compatible Chassis or Parts: F103
How to get Tamiya 50503 Spare Parts F-1 Front Suspension Arm( B-PART)? Click here!
Tamiya 58438 1/10 RC M-Chassis Electric Mini Cooper Racing (M-05)
After 10 years since the release of the first M-series R/C car, Tamiya is now releasing the latest M-05 chassis with the popular Rover Mini Cooper racing version body.
This is a 1/10 R/C assembly kit.
Length: 315mm, Width: 167mm, Height: 135mm.
The very popular Mini Cooper Racing car comes loaded on the new M-05 chassis.
The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Sticker sheet included.
Includes 60D radial tires and silver Rover Mini Cooper wheels.
ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
A wide variety of Option Parts for M-05 chassis machines and bodies are already available for further customization.
How to get Tamiya 58438 1/10 RC M-Chassis Electric Mini Cooper Racing (M-05)? Click here!
Tamiya 58302 1/10 Electric Car TT01 Enzo Ferrari with ESC
About the Enzo Ferrari
September 2002, Ferrari officially introduced the all new Enzo Ferrari at the Paris Auto Show. The revolutionary all-carbon fiber body of this sports car, that has the same name as Ferrari's founder uses design elements from the Ferrari F1 cars with an elongated nose sprouting vertical blades that integrate with large air intakes. Drive-by-wire electronic speed control is capable of shifting in 0.15 seconds. The car features 6-liter V12 engine (called the type F140) capable of delivering over 650 horsepower, reaching 67kgm of torque, and propelling the car to speeds of over 350kph. The Enzo Ferrari was made with not only speed, but also with superior down force aerodynamics in mind, hence the addition of a retractable rear-wing that affords 775kg of down force at 300km. And as for speed control, this stable stallion is the first road car to be equipped with state-of-the-art carbon-ceramic brake discs. Deserving of the name of Ferrari's founder, and setting a new vision for the future is the Enzo Ferrari.
The easy to assemble shaft-driven 4WD TT-01 chassis The longitudinally placed motor allows reliable power transmission through a shaft-driven 4WD transmission. Mechanism and battery are loaded in the bathtub chassis in a flat position for greater stability. Low center of gravity and 4-wheel double wishbone suspension insure top control. The tightly sealed gearboxes feature differential gears that provide smooth cornering
Turn your model into a pure racer Many seperately available option parts can be mounted on the Enzo Ferrari TT-01 chassis such as full ball bearings and CVA Mini Shock Unit Cylinder. These parts will enhance the performance of your R/C car. Try your own original setting.
Basic Specifications
Total length: 457mm
Total width: 202mm
Total height: 110mm
Total width: 202mm
Clearance: 9mm
Weight Fully-Equipped: 1,490g (Measurement includes TP-S3003 servo, CPR Unit and RC2400SP Battery with RS-540 motor)
Wheelbase: 257mm
Tread F/R: 159/157mm
Chassis Shape: Bathtub
Steering Tie Rod: 3 part
Suspension: Front and Rear Double Wishbone
Caster Angle-F/R: 2deg/0deg
Camber Angle-F/R: 1deg/1deg
Toe Angle-F/R: 0deg/0deg
Damper: F/R Friction Damper
Transmission Type: Longitudinally placed motor with Shaft-Driven 4WD
Gear Ratio: 8.35:1 (standard in the kit)
Diff. gear system: F/R 3-Bevel Diff
Speed Controller: Electronic Speed Controller (CPR Unit)
Tire Width: F/R both 27mm
Tire Diameter: F/R both 65mm
Tread Pattern: F/R Racing Radial Type
Type 540 motor included
How to get Tamiya 58302 1/10 Electric Car TT01 Enzo Ferrari with ESC? Click here!
Tamiya 54181 Option Parts Brushless Motor 01 18T
Are you new to R/C and looking at what kind of motor to install in your machine The next generation power units for radio control machines, brushless motors, now has a new inexpensive 18T motor joining the ever increasing line-up perfect for beginners. This motor has approximately the same power output as the Lightly-Tuned Motor 28T (Item 53983). The great thing about brushless motors is that you do not need to replace brushes and brush rings and no cleaning of the commutator is necessary making maintenance a breeze.
Can be used with any 1/10 R/C touring cars.
2270KV (KV denotes RPM per volt).
Input voltage: 6.6-7.2V.
Weight: 211g.
Sensorless design.
It is not suitable for big tire off-road, CR-01, and machines that require two motors.
Tamiya Brushless ESC 01 TBLE-01 (Item 54038) is required.
Lubricate bearings with Metal Bearing Lubricating Oil (Item 53508) to enhance performance and motor life.
How to get Tamiya 54181 Option Parts Brushless Motor 01 18T? Click here!
Tamiya 51386 Bodies Buggy Champ Body
The Buggy Champ s distinct body shape is reproduced with a durable plastic shell.
Screws & nuts, stickers, and two extra lights for the body are included.
How to get Tamiya 51386 Bodies Buggy Champ Body? Click here!
Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)
Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)
How to get Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)? Click here!
Tamiya 57788 1/10 XB - Expert Built XANAVI GT-R R35(TT01E)
After 5 years away from the racing track, two GT-R racing cars, #22 and #23, were entered by Xanavi NISMO in the 2008 Japanese Super GT Series. The GT-R came back with a bang with a one-two finish at the season s opening race, and even with a 55kg handicap the GT-R went on to record back to back wins at the second race of the season. Just as impressive, the GT-R went on the win the 2008 Super GT Championship in its first season back in competitive racing.
This is a 1/10 ready-to-run R/C model of the 2008 Super GT Championship racing car Xanavi NISMO GT-R (R35).
Polycarbonate body captures the aggressive form of the GT-R and is fully finished.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type E chassis gives this electric R/C car superior control and handling.
Includes ESC, type 540 motor, and 2-channel R/C system.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine.
How to get Tamiya 57788 1/10 XB - Expert Built XANAVI GT-R R35(TT01E)? Click here!
Tamiya 58435 1/10 Electric Car Cusco Dunlop Impreza (TA05v.2)
The 2008 Super GT300 entrant, the Cusco Dunlop Subaru Impreza is the first Tamiya 1/10R/C car to feature the new TA05 Ver.II chassis. Finishing the Super GT300 season in 6thfrom a field of 28 entrants, the Impreza showed its prowess at the 4th Round in Sepang where it started from pole position and went on to claim the win. The Impreza also went onto record two more pole positions in the wet at Round 6 in Suzuka and at Round 9 in Fuji.The Impreza is powered by a Horizontally Opposed DOHC turbo charged 4-cylinder engine and is the only AWD race car in Super GT.
The One & Only AWD Machine
This is a ready to assemble electric powered R/C model of the Cusco Dunlop Subaru Impreza, which was the only AWD GT300 entrant during the 2008 Super GT season, and the winner of Round 4 Sepang. The impressive 4-door sedan body is recreated in durable polycarbonate, with small side mirrors, large rear wing, and front canards all separately molded for enhanced detail. This model features the evolved version of the proven belt-driven 4WD TA05 chassis, the TA05 ver.II.
Further Evolved Race-Spec Chassis, TA05 ver.II
The chassis width has been reduced for greater ground clearance when the chassis rolls. Thanks to the position of the integrated motor mount, the position of the battery pack has been moved forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T center pulley. The four wheel double wishbone suspension system features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes.
This is a 1/10 R/C assembly kit of the Cusco Dunlop Subaru Impreza.
The new TA05 ver.II chassis features 5 newly designed parts: L Parts (Lower deck), KParts (Stiffener), M Parts (Suspension Mount), Body and H Parts (Wing, Mirror), DC Parts(Motor mount).
Overall chassis width is narrower which improves road clearance in rolls.
The battery position is moved forward for improved driving characteristics.
The separated suspension mounts enable easy maintenance of the drive train.
The belt-driven 4-wheel drive chassis features isometric drive belts, front and rear 37T ball diff. and a horizontally mounted motor.
Features inboard front suspension and short reversible suspension arms as well as up-rights with 1050 ball bearings.
Aluminum one-piece integrated motor mount.
Type 540 motor included.
Polycarbonate rear wing Option Part can be installed.
ESC, 2-channel R/C system, battery pack & charger are separately required.
How to get Tamiya 58435 1/10 Electric Car Cusco Dunlop Impreza (TA05v.2)? Click here!
Tamiya 53365 Option Parts TG10 Alu.Racing Steering Set
Compatible Chassis or Parts: TG10-Mk.1, TB-01
How to get Tamiya 53365 Option Parts TG10 Alu.Racing Steering Set? Click here!
Tamiya 53950 Option Parts TGM-04 Zerol Bevel Gear
This special type of spiral bevel gear features curving teeth for higher strength and efficiency than straight bevel gear. Use in place of kit included straight bevel gear.
Compatible chassis: TGM-04, TGM-03
How to get Tamiya 53950 Option Parts TGM-04 Zerol Bevel Gear? Click here!
Tamiya 54166 Option Parts F104 Alu. Motor Mount R/L
This new motor mount for F104 chassis machines can replace the standard kit resin part sand provides your machine with improved precision, chassis rigidity, and a more stylish look.
Aluminum motor mount L/R x 1pc. each.
S Parts (Bearing holder) x 1pc.
Can be used on F104 chassis machines.
How to get Tamiya 54166 Option Parts F104 Alu. Motor Mount R/L? Click here!
Tamiya 51377 Bodies 1/10 Scale R/C F104 Body
F/R wing included.
Stickers and masking seals included.
Can be used with F104 chassis machines.
How to get Tamiya 51377 Bodies 1/10 Scale R/C F104 Body? Click here!
Tamiya 53427 Option Parts TA04 Suspension Arm
Compatible Chassis or Parts: TA04.PRO TA04
How to get Tamiya 53427 Option Parts TA04 Suspension Arm? Click here!
Tamiya 53293 Option Parts Reinforced Slick Tire A*2
Compatible Chassis or Parts: SP678, 732, OP232, 335 Wheels and OP295, 834, 835 Inner Sponge
How to get Tamiya 53293 Option Parts Reinforced Slick Tire A*2? Click here!
Tamiya 53808 Option Parts TRF415 Sus. Mount XA
Compatible Chassis or Parts: TRF415, 415MS
How to get Tamiya 53808 Option Parts TRF415 Sus. Mount XA? Click here!
Tamiya 53222 Option Parts M-Chassis Super Slicks
Compatible Chassis or Parts: SP569, 972 Wheels and SP686, OP204 Inner Sponge
How to get Tamiya 53222 Option Parts M-Chassis Super Slicks? Click here!
Tamiya 53164 Option Parts 4WD Carbon Gear Shaft
Tamiya 53164 Option Parts 4WD Carbon Gear Shaft
How to get Tamiya 53164 Option Parts 4WD Carbon Gear Shaft? Click here!
Tamiya 51382 Spare Parts F104 H Parts (Rear Wing)
Compatible Chassis or Parts: F104
How to get Tamiya 51382 Spare Parts F104 H Parts (Rear Wing)? Click here!
Tamiya 51383 Spare Parts F104 J Parts (Front Wing)
Compatible Chassis or Parts: F104
How to get Tamiya 51383 Spare Parts F104 J Parts (Front Wing)? Click here!
Tamiya 53262 Option Parts 0.4 Steel Pinion Gear 28/29T
Compatible Chassis or Parts: F103 (Combination with OP104), TRF415
How to get Tamiya 53262 Option Parts 0.4 Steel Pinion Gear 28/29T? Click here!
Tamiya 53468 Option Parts Med-Narrow WhMesh Wheel(+2)
These messh wheels measure 24MM in width and are +2 mm offset.
How to get Tamiya 53468 Option Parts Med-Narrow WhMesh Wheel(+2)? Click here!
Tamiya 53900 Option Parts 04 Spur Gear 93T/104T (F103GT)
0.4 Module spur gear features finer teeth than standard kit-included 0.6 module gear, allowing minute ratio adjustment to improve acceleration and efficiency. Gear contains molybdenum for reduced friction resistance.
*Compatible chassis: Mesh with #53101 to #53101 (0.4 pinion gear) to use with F103 and C Car chassis
How to get Tamiya 53900 Option Parts 04 Spur Gear 93T/104T (F103GT)? Click here!
Tamiya 53881 Option Parts Off-Road Rear Wheel Large Diamater Wheels(62/35)
Newly designed off-road wheels for tires featuring larger diameter and width, and new micro pin tread pattern designed for optimum running and control on hard dirt tracks.
*Compatible chassis: most Tamiya off-road buggy chassis.
How to get Tamiya 53881 Option Parts Off-Road Rear Wheel Large Diamater Wheels(62/35)? Click here!
Tamiya 53770 Option Parts 3/16mm Round Head Socket Screw / Blue (5 pcs.)
3x16mm Round Head Socket Screw / Blue 5pcs
How to get Tamiya 53770 Option Parts 3/16mm Round Head Socket Screw / Blue (5 pcs.)? Click here!
Tamiya 53113 Option Parts Racing R/S Inner Sponge
Compatible Chassis or Parts: SP419, 454, 476 OP214, 220, 224, 227, 293, 294
How to get Tamiya 53113 Option Parts Racing R/S Inner Sponge? Click here!
Tamiya 53215 Option Parts M-Chassis Slicks *2
Compatible Chassis or Parts: SP569, 676, 685, 708, 714, 748, 825 OP341
How to get Tamiya 53215 Option Parts M-Chassis Slicks *2? Click here!
Tamiya 53295 Option Parts 1/10 Tire Inner Foam
Compatible Chassis or Parts: SP419, 454, 476, 810, OP214, 220, 224, 227, 293, 294
How to get Tamiya 53295 Option Parts 1/10 Tire Inner Foam? Click here!
Tamiya 51240 Spare Parts High Density Spike Tires K (4WD/Front,62/25)
Newly designed off-road buggy tires feature tread pattern designed for excellent running and control on both on or off-road tracks.
*These tires are similar to Items 53878 and 53879, but feature different compound with lower grip.
*Compatible chassis: most Tamiya off-road buggy chassis.
How to get Tamiya 51240 Spare Parts High Density Spike Tires K (4WD/Front,62/25)? Click here!
Tamiya 50966 Spare Parts TL-01LA M Part(Suspension Arm)
Compatible Chassis or Parts: TL-01LA, OP467
How to get Tamiya 50966 Spare Parts TL-01LA M Part(Suspension Arm)? Click here!
Tamiya 50547 Spare Parts Wide Racing Slick Tire
Compatible Chassis or Parts: SP549, SP673, OP229, OP233
How to get Tamiya 50547 Spare Parts Wide Racing Slick Tire? Click here!
Tamiya 51022 Spare Parts Medium-Narrow 10-Spoke Wheels(Offset-0)
Compatible Chassis or Parts: OP412, OP433, OP482, SP 1023, 1049 Offset 0
How to get Tamiya 51022 Spare Parts Medium-Narrow 10-Spoke Wheels(Offset-0)? Click here!
Tamiya 51113 Spare Parts TG10-Mk.2 B Parts (Sus. Arm)
Compatible Chassis or Parts: TG10-Mk.2
How to get Tamiya 51113 Spare Parts TG10-Mk.2 B Parts (Sus. Arm)? Click here!
Tamiya 50678 Spare Parts Tom's Exiv JTCC Wheels *2
Compatible Chassis or Parts: SP 419, 454, 476, 810OP 214, 220 , 224, 227, 293, 294
How to get Tamiya 50678 Spare Parts Tom's Exiv JTCC Wheels *2? Click here!
Tamiya 51139 Spare Parts ??p5x??p10x0.1mm Shim*10
Compatible Chassis or Parts: TG10-Mk.2
How to get Tamiya 51139 Spare Parts ??p5x??p10x0.1mm Shim*10? Click here!
Tamiya 58367 1/10 Electric Car Direct Drive Touring Car Chassis Kit
Direct Drive System Allows Realistic Control!
Relive the experience of pure driving pleasure, with this high-performance 2WD chassis. Direct Drive transmission system coupled with advanced tires allows the ultimate in precision control. Based on our ever-popular F103 chassis, this chassis features newly designed front upright and wheel mounts, allowing it to utilize touring car wheels and body. Chassis can also make use of a wide variety of option parts to further improve and tweak performance.
About the Model
Front suspension: ITEM 53258 Formula Link-Type Front Suspension (newly designed front upright)
Rear suspension: T-Bar System (newly designed Rear wheel axles)
Tire: ITEM 53220 Super Slick Tires (4pcs)
Chassis may use any 1/10 Touring Car body (excluding short wheelbase type).
Chassis weight of 700g is much lighter than 4WD touring cars, allowing greatly increased running time.
How to get Tamiya 58367 1/10 Electric Car Direct Drive Touring Car Chassis Kit? Click here!
Tamiya 58380 Off Road Electric 1/10 R/C Keen Hawk(Working Title)
Developed using actual racing data, the DF-03 4WD Racing Buggy Chassis now receives its second body style. Following on the popular Dark Impact, which featured a black-colored agressive appearance, Keen Hawk sports a sleek, futuristic and ""heroic"" appearance. The durable monocoque chassis provides contortion resistance with a drive-train layout that features a propeller shaft arranged in the center for optimum center of gravity for excellent balance. Combined with the multi-adjustable 4-wheel double-wishbone suspension, it is a force to be reckoned with at the track.
About the Model
High performance 1/10 4WD buggy assembly kit designed for off-road racing
Includes white-colored Large Dish Wheels and High Density Spike Tires (GRP compound K) for excellent control and running on dirt tracks.
Front and rear compact & sealed gearboxes equipped with ball differentials for traction on any surface
Full ball bearings included for maximum drive-train efficiency
4-wheel independent double wishbone suspension features CVA oil dampers and extra long suspension arms for improved stability and handling
Includes type 540 motor
Requires Electronic Speed Controller (sold separately)
How to get Tamiya 58380 Off Road Electric 1/10 R/C Keen Hawk(Working Title)? Click here!
Tamiya 53766 Option Parts 3x8mm Round Head Socket Screw / Blue
3x8mm Round Head Socket Screw / Blue 5pcs
How to get Tamiya 53766 Option Parts 3x8mm Round Head Socket Screw / Blue? Click here!
Tamiya 53717 Option Parts TB Evolution IV Suspension Mount E (Blue)
RC TB Evo IV Sus Mount E (Blue)
Highly accurate and durable aluminum suspension mount features ball linkage for smooth suspension movement.
How to get Tamiya 53717 Option Parts TB Evolution IV Suspension Mount E (Blue)? Click here!
Tamiya 53851 Option Parts Titanium Coated 46mm Stainless Shaft*2
Compatible Chassis: TRF415MS, TB Evolution IV
Titanium coated shafts extend the wear life cycle of suspension parts.
How to get Tamiya 53851 Option Parts Titanium Coated 46mm Stainless Shaft*2? Click here!
Tamiya 53585 Option Parts 3mm Shim Set *10 x 3 types
10 pieces each of 0.1mm, 0.2mm, and 0.3mm thickness
How to get Tamiya 53585 Option Parts 3mm Shim Set *10 x 3 types? Click here!
Tamiya 53517 Option Parts TL-01LA Stabilizer Set
Compatible Chassis or Parts: TL-01LA, OP467
How to get Tamiya 53517 Option Parts TL-01LA Stabilizer Set? Click here!
Tamiya 51219 Spare Parts Drift Tires Type-A & Wheels
Compatible Chassis or Parts: TT-01D
How to get Tamiya 51219 Spare Parts Drift Tires Type-A & Wheels? Click here!
Tamiya 50882 Spare Parts TA04 King Pin
Compatible Chassis or Parts: TA04.PRO, TA04, TB-EVO, TGR, TG10R, OP430, OP467
How to get Tamiya 50882 Spare Parts TA04 King Pin? Click here!
Tamiya 50934 Spare Parts F201 G Parts (Ring Gear)
Compatible Chassis or Parts: F201
How to get Tamiya 50934 Spare Parts F201 G Parts (Ring Gear)? Click here!
Tamiya 50593 Spare Parts 4x6mm Flanged Tube*5
Tamiya 50593 Spare Parts 4x6mm Flanged Tube*5
How to get Tamiya 50593 Spare Parts 4x6mm Flanged Tube*5? Click here!
Tamiya 50599 Spare Parts W Part for 50519
Compatible Chassis or Parts: SP519
How to get Tamiya 50599 Spare Parts W Part for 50519? Click here!
Tamiya 50588 Spare Parts 2mm E-Ring *15
Tamiya 50588 Spare Parts 2mm E-Ring *15
How to get Tamiya 50588 Spare Parts 2mm E-Ring *15? Click here!
Tamiya 50591 Spare Parts 5mm Ball Collar *5
Compatible Chassis or Parts: TGX-Mk.1
How to get Tamiya 50591 Spare Parts 5mm Ball Collar *5? Click here!
Tamiya 50592 Spare Parts 5mm Ball Connector *10
Tamiya 50592 Spare Parts 5mm Ball Connector *10
How to get Tamiya 50592 Spare Parts 5mm Ball Connector *10? Click here!
Tamiya 57786 1/10 XB - Expert Built Impreza WRC08 TT01E
At the 7th Round of the 2008 World Rally Championship ""the Acropolis Rally of Greece"", the world has seen the Subaru WRC team unleash their new exciting 2008 Impreza. With team driver Petter Solberg at the helm, the Impreza went on to win 2nd place on debut. The Impreza has also gone on to win a 3rd place podium finish at the Round 9 ""Neste Oil Rally Finland"".
About the Model
This is a 1/10 ready-to-run R/C model of the 2008 WRC Impreza racing car.
Polycarbonate body captures the aggressive form of the Impreza.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type E chassis gives this electric R/C car superior control and handling.
Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control Unit TLU-02 (sold separately).
2 white and 2 red 5mm LED lights (Total 4) are included.
Both front and rear light cases have two 5mm and four 3mm LED Light installation points.
Includes ESC (TEU-101BK), Type 540 motor and 2-channel R/C system.
Length: 434mm, Width: 188mm, Height: 141mm.
Battery and charger separately required.
Wide variety of Option Parts are separately available to customize your machine.
How to get Tamiya 57786 1/10 XB - Expert Built Impreza WRC08 TT01E? Click here!
Tamiya 51362 Spare Parts M-Chassis 18-Spoke Wheel *4
These new 18-spoke wheels provide R/C fans another option when personalizing their M chassis machines.
Compatible with all M-03 and M-04 chassis machines.
How to get Tamiya 51362 Spare Parts M-Chassis 18-Spoke Wheel *4? Click here!
Tamiya 51363 Bodies Fiat 500 Body
This new body parts set provides Fiat 500 fans the opportunity to design another body for their 1/10 R/C Racing Car Fiat 500 (Item 58427).
*When attaching to M-03 chassis machines (other than M-03M) M-03M F Part s (Upright) (Item 51238) extension is required. (Sold separately)
Width: 170mm, Length: 347mm, Wheelbase: 225mm.
How to get Tamiya 51363 Bodies Fiat 500 Body ? Click here!
No comments:
Post a Comment